EQUIPMENT

Mark-10 model BG-50 motorized force measurement system, series BG, on adjustable stand, with cont...

Pneumatic Scale Pnumaflow filler valve testing machine, model number PO1 Pneumaflow, serial numbe...

Sellers 200 HP hot water generator, model S-200-W 15 Senior, serial number 101184, ASME number 10...

Cornell 8" dual lobe non clog pump, stainless steel impeller, 30 HP electric motor belt drive, 35...

Gast mild steel vacuum pump, model number 0823-101Q-G271X, serial number 1191, 1/2" threaded fitt...

50 gallon stainless steel tank with hopper, 22" wide x 30" long x 20" deep, 22" wide x 27" long x...

Enercon Cap Sealer model 10253 induction sealer, serial number 10253-1, 9-1/2" wide x 22" long ca...

Hi Side Fabrication 24" wide x 10' long stainless steel bias feed shaker, 4' laned right hand bia...

Lot of 5 Key shaker eccentrics. Condition info: Good Condition

Fairview Conveyor 24" wide x 8' long stainless steel shaker, with a 22" wide x 24" long separatio...

Angelus 40P-MSLF 4 paddle topper, pads are for 401 diameter cans, as is. Condition info: Good Condition

Tri-Clover type 2EEH stainless steel centrifugal pump, bowtie impeller, 1.5" threaded ports, fair...

Tri-Clover stainless steel centrifugal pump, serial number SP-51-56-3-003087, 1-1/2" Tri-Clover i...

Coker 3" x 2" stainless steel centrifugal pump, Tri-Clover fittings, 20 hp 3525 rpm drive motor, ...

3" x 2" stainless steel centrifugal pump, fair condition - as is. Condition info: Fair Condition

Waukesha model DO-10 positive displacement pump, 1.5" threaded ports, fair condition - as is. Condition info...

Waukesha model DO-25 positive displacement pump, 1.5" threaded ports, fair condition - as is. Condition info...

Sine model MB135-NNTC positive displacement pump, serial number 9771052, 3" Tri-Clover infeed and...

Moyno type SSO progressive cavity pump, stainless steel contact, frame 1FF8, form 7S, serial numb...

Sine model MF135-NNTC positive displacement pump, serial number 97711051, 3" Tri-Clover infeed an...

Vaslin Bucher high pressure washdown pump system, model KIT-AR, serial number 10047641, Cat model...

Sandpiper model SS-A2-A diaphragm pump, type TF-4-SS, serial number 612265, 2-1/2" threaded produ...

Brown model 202 paddle pulper, serial number 207RADA-82, with 3-paddle armatures, requires a rebu...

Brown model 202 paddle pulper, serial number 207RADA-57, with 3-paddle armatures, requires a rebu...

Key 24" diameter x 40" long stainless steel reclaim reel, 2" flights, 1/16" perforated holds, 28"...

24" wide x 100" Olney stainless steel riffle pan destoner, 2" tall angled riffles, lifting lever ...

Compact II 2" plastic ball valve with a Habonim type C20-SR-2C-IMP electronic actuator, new. Condition info:...

Olney 40" wide riffle pan destoner, model 1991, serial number 240-SC, 40" wide x 48" long destoni...

Compact II 2" plastic ball valve with a Habonim type C20-SR-2C-IMP electronic actuator, new. Condition info:...

Stainless steel pict heater and Spirax Sarco culinary steam filter, pict heater is 6" diameter x ...

Ingersoll Rand 20 HP air compressor, 1-1/4" threaded compressed air discharge, 20 HP electric mot...

Sesco 2" deflection style magnet, all stainless steel, with (2) Soldo 2" air actuated ball valves. Condition...

All American stainless steel hand pallet jack, manual operation, all stainless steel construction. Condition...

Jensen 'Jenflo' 1.5" stainless steel air actuated 3-way product divert valve, Tr-Clamp fittings, ...

Compact II 2" plastic ball valve with a Habonim type C20-SR-2C-IMP electronic actuator, new. Condition info:...

Streamline model SM 2000 hot water mixing station, 3/4" threaded steam infeed, 3/4" threaded wate...

Sesco 2" deflection style magnet, all stainless steel, with (2) Soldo 2" air actuated ball valves. Condition...

Southworth Product Corp. mild steel pallet elevator, model number 5-28ROLLC2, serial number 40209...

Stainless steel stairs, 7 each 24" wide x 9" deep steps, 76" tall platform area, all stainless st...

Advanced Tabco 3 compartment stainless steel sink, model 9-43-72-24-R, 3 each 24" wide x 24" long...

Condition info: Good Condition

Stainless steel unsnipped bean remover, 29" diameter x 52" long drum, all stainless steel constru...

Hughes green bean grader, model number 050-14433D, serial number 99-19235-04, 24" diameter x 66" ...

Urschel model SPS corn slitter, stainless steel and brass contact, cone feed hopper, 3hp 230/460/...

Stainless steel unsnipped bean remover, 30" diameter x 52" long drum, all stainless steel constru...

Southworth model 4LS435 hydraulic pallet lift, serial number 51708-01/M051708-100-01, with a 1hp ...

32" diameter mild steel air blower, 5hp belt drive, 12" intake, 11" x 12" discharge, mounted to a...

Key 34" wide x 48" long stainless steel pit removal shaker, screen with 1-1/8" round holes, overh...

Key 14 lane stainless steel cup down shaker, 60" wide x 9' long, with a pit removal section (scre...

Key 17 lane stainless steel cup down shaker, 72" wide x 8' long, with drive and dual Iso-Flo ecce...

Key-Farmco model SSR sliver remover, all stainless steel construction, (7) 48" wide rolls, 32" lo...

Valley Welding 40" diameter x 6' long rotary sizer, wash reel, all stainless steel contact and fr...

Valley Welding 64" wide x 96" long stainless steel shaker, unit has (2) two removable 31" wide sc...

Key-Farmco model SSR sliver remover, all stainless steel construction, (7) 48" wide rolls, 32" lo...

Key-Farmco model SSR sliver remover, all stainless steel construction, (7) 48" wide rolls, 32" lo...

Valley Welding 64" wide x 96" long stainless steel shaker, unit has (1) one removable 25" wide sc...

Graham Corporation Heliflow heat exchanger, model number 8WXF-12, serial number 06-63880-3, 100 P...

Legion model TWT-60 60 gallon stainless steel steam jacketed kettle, 30psi, mechanical tilt, 30" ...

Marcelissen model SR sliver remover equipped with (18) 2" diameter x 60" long ribbed rolls, 60" w...

APV model SR6GLO-S plate and frame heat exchanger, with 16" x 50" plates, set up for (3) zones wi...

Legion 40 gallon steam jacketed kettle, model LT-40, 40psi, serial number 840697, no NB#, 1.5" ho...

Mueller model LI1N-4/3-L111 ammonia plate chiller, (8) plate stations, (7) 45" x 96" dimpled refr...

Armstrong model X19350L-21 all stainless steel plate and frame heat exchanger, equipped with (21)...

Paasch and Silkeborg model HCT butter churner, 2" liquid feed, hydraulic drives with built in pow...

Votator (Cherry-Burrell) dual 6" x 72" swept surface heat exchangers, each with 9 square feet of ...

Lee Industries 300 gallon double motion swept surface kettle, with a 90psi steam jacket, open top...

30 cubic feet perforated stainless steel basket, 48" diameter x 31" straight wall depth, with add...

4" diameter x 82' long hot hold loop with (7) 10' straight sections, 3" inlet and discharge ports...

Graham Corporation Heliflow heat exchanger, model number 8WXF-12, serial number 04-58751-2, 100 P...

Cipriani stainless steel plate and frame heat exchanger, with (48) 5" x 12" (145mm x 305mm type P...

Graham Corporation Heliflow heat exchanger, model number 8WXF-12, serial number 06-63880-4, 100 P...

Groen model RA100 steam jacketed kettle, open top, 3" center bottom discharge, 316 stainless stee...

Graham Corporation Heliflow heat exchanger, model number 9XF-14, serial number 05-63018-1, 65 PSI...

Krones 20 station Solomatic front and back labeler with both cold glue stations and Autocol press...

L&A Engineering tube-in-shell heat exchanger bundles, (7) stainless steel housings measuring 9" d...

Groen model RA100 steam jacketed kettle, open top, 3" center bottom discharge, no nameplate, fair...

Quadrel front only pressure sensitive labeler for round containers, 4.5" wide x 10' long table to...

Groen 250 gallon single motion swept surface kettle, model D/INA/2/TA-250, 45PSI steam jacket, an...

30 cubic feet perforated stainless steel basket, 48" diameter x 31" straight wall depth, with add...

Chester-Jensen 70 gallon double motion swept surface cooker-cooler (kettle), model 70N2.5, 100psi...

Sato model S84 label printer/applicator with dual printer/applicator heads, Dorner triple belt co...

Teledyne Taptone model T550-024P dud detector, with controls, detector and reject unit, serial nu...

Sato model S84 label printer/applicator with a Dorner dual belt conveyor, applies labels to the b...

Handtmann model PX94-RC whole muscle portioner, stainless steel construction, requires connection...

Sato model S84 label printer/applicator with a Dorner dual belt conveyor, applies labels to the b...

Groen 250 gallon single motion swept surface kettle, model D/INA/2/TA-250, 45PSI steam jacket, an...

Morse model 289F forklift mounted drum racker, tilts and stacks 55 gallon rimmed plastic or steel...

Bear horizontal roll through labeler for 300x407 cans, left to right can feed, with standard hot ...

Townsend model NL-17 "Smart Linker" sausage linking line, fills and links cellulose and collagen ...

Autio model 1101 GH grinder with an Autio positive displacement vane pump, rated to 25,000 pounds...

Cimme 7.5hp air blower, type GCH-005020-E4-RD, 3490rpm 230/460/3/60 motor, 6.5" x 9" blower infee...

Tipper Tie-Alpina model 18/15 Swiper tie clipping machine, all stainless steel contact and frame ...

Cimme 5hp air blower, type GCH-005020-E4-RD, 3540rpm 460/3/60 motor, 6.5" x 9" blower infeed, 8.5...

Stainless steel rubber disc scrubber, 17" wide x 6' long with (21) rows of (14) rubber discs, adj...

Handtmann model PX94 whole muscle portioner, stainless steel construction, requires connection to...

Reyco 50hp negative air pump, 8", skid mounted with muffler and a 2" x 7' receiver, Roots type 71...

Southworth pneumatic pallet lift with a free spin turntable, good condition, as is. Condition info: Good Con...

Handtmann model HVF-90 vacuum style muscle stuffer / filler, all stainless steel construction, wi...

Imdec batch steam peeler for tomatoes, scaled for R&D/Laboratory studies, with glass peeling cham...

FMC model 3AR corn cutter, chain infeed, with cob profile adjustment assembly, with drive, automa...

(10) New Age Corporation stainless steel carts, (1) ten tray unit measuring 18" wide x 26" long x...

New Age Industrial aluminum cart for trays, 28" wide x 31" long, with five open shelves with 10" ...

New Age Industrial aluminum cart for trays, 28" wide x 31" long, with five open shelves with 10" ...

Lyco Warhorse abrasive peeler, (6) roll set up with (5) abrasive rolls and (1) brush roll, hopper...

Norris model N10MNS twin head milk dispenser/beverage cooler, for use with bags or bag-in-boxes, ...

30" wide x 9' long x 33" tall stainless steel table, mild steel legs, good condition – as is. Condition info...

Lifto-West model LOM-4 forklift mounted 4 drum handler, fits all conventional rimmed steel, plast...

Hanikson model HPR35 refrigerated air dryer, R134A refrigerant, rated for 35CFM, 115/1/60, serial...

Malvern Instruments in-line sampling particle size analyzer, model number Insitec LPS, serial num...

New Age Industrial aluminum cart for trays, 28" wide x 31" long, with five open shelves with 10" ...

New Age Industrial aluminum cart for trays, 28" wide x 31" long, with five open shelves with 10" ...

New Age Industrial aluminum cart for trays, 28" wide x 31" long, with five open shelves with 10" ...

Stainless steel cart with shelves, 40" wide x 40" long, with five solid shelves with 10" spacings...

Ingersoll- Rand model SSR-UP6-30-150 rotary screw air compressor, 30hp, 150psi, 112cfm, 5316 hour...

Ingersoll-Rand model SSR-EPE-25V rotary screw air compressor, 25hp, 128psi, 100cfm, 230/3/60, ser...

Tug model MG-30-7 tow tractor, with a drawbar capacity of 3000 pounds, propane powered, set up wi...

Manhattan heavy duty drill press, model 951235, manufacture number 227337, speed adjustable from ...

Quincy model QED-500 refrigerant air dryer, R410A refrigerant, 460/3/60, product number 810280952...

Ingersoll-Rand model D360IN refrigerated air dryer, 212CFM, R13a refrigerant, 230/1/60, as is. Condition inf...

Cimme 5hp air blower, type GCH-005020-E4-RD, 3455rpm 220/3/60 motor, 6.5" x 9" blower infeed, 8.5...

200 gallon horizontal compressed air receiver, 200psi, as is - good condition. Condition info: Good Condition

Ingersoll-Rand model SSR-EP25SE air compressor, 25hp screw compressor, 95CFM, 125PSI, 230/460/3/6...

Innotec (Manara Roberto S.R.L.) model GE-150 electric steam generator, 150kW (200hp), rated at 3 ...

Spray Dynamics "Clog Free Spray Encoater", control panel and blower skid assembly, with a Ring Co...

24" wide x 46" long x 19" tall stainless steel cart, solid top, on casters, good condition – as is. Conditio...

Ingersoll-Rand model TS2A air dryer, air cooled, 230/3/60, 175psi max, 2008, serial number DN0000...

Stainless steel hot water generator (hot set), 1" threaded steam inlet with 3/4" adaptor, 1-1/2" ...

FMC model 3AR corn cutter, chain infeed, with cob profile adjustment assembly, with drive, automa...

Ingersoll-Rand type SSR 20hp rotary screw air compressor, model U20H-SP, 125psi, 230/460/3/60 (wi...

New Age Industrial aluminum cart for trays, 28" wide x 31" long, with five open shelves with 10" ...

24" x 24" portable stainless steel step up platform, 2 steps, 21" standing elevation, 52" high sa...

New Age Industrial aluminum cart for trays, 28" wide x 31" long, with five open shelves with 10" ...

Zeks model 200NCGA400 refrigerated air dryer, serial number 340060, R404a refrigerant, 1hp compre...

Stainless steel cart with shelves, 40" wide x 40" long, with seven solid shelves with 10" spacing...

30" wide x 6' long x 24" tall stainless steel table, mild steel legs, mounted on casters, fair co...

Continental Hydraulics 7.5hp hydraulic powerpack, model number V8-075T-15V-P-EP, I.D. 051401-6035...

Cesco in-line magnet, serial number 28267-1, 2" flanged connections, 5 each 1" diameter x 3-1/2" ...

IC gas fired boiler burner, type AF-829204, with louvers, insulated boiler flange, with gas contr...

D&K 10' wide metal brake, as is - fair condition. Condition info: Fair Condition

Hawker PowerTech model PT3-18-200 high frequency IntelliCharger fork lift battery charger, 18 cel...

AZO model ST65 dust collector, 18" diameter x 36" tall, 3" Tri-Clamp tangential infeed, 3" Tri-Cl...

Ingersoll-Rand model SSR—UP6-40-125HA compressor, 40hp screw compressor, 185CFM, 125PSI, 460/3/60...

Arrow model A-150-1 refrigerated air dryer, serial number WC142, 2" ports, 115/1/60, R22 refriger...

8" diameter x 16" long stainless steel rotary valve, 8" diameter infeed, 6" x 16" discharge flang...

"Rogers Machinery model RMC-KI-10-125 10hp oil lubricated twin screw air compressor, rated to 125...

Brunner Engineering 120 gallon vertical compressed air receiver, 200psi, as is - good condition. Condition i...

Stainless steel parts washer, 20" wide x 20" long x 1-1/2" deep perforated wash tray, hinged lid,...

Van De Graaf pully drive motor, 1.5hp, 208/3/60, 94'/minute, stainless steel, as is - fair condit...

Jensen 'Jenflo' 1.5" stainless steel air actuated 3-way product divert valve, Tr-Clamp fittings, ...

Key model 2XSS vibratory air cleaner, all stainless steel contact and frame construction, with an...

MAP 36" wide x 60" long brush scrubber, with 12 brush rolls, 1/2 hp gearhead drive, 230/460/3/60,...

Vanmark 8 roll scrubber, small discharge screw at the end, hydraulic drives, all stainless steel ...

Commercial 36" wide x 84" long stationary product destoner, stainless steel construction, flume w...

American International Manufacturing fruit washer, equipped with a 9" diameter x 9' long bottom m...

Safi NGX5003 and NGX5005 olive cleaning system, series 20, chaise number C0006, stainless steel r...

Stainless steel flooded wash tank, 72" wide x 10' long Intralox flighted belt, 10' high discharge...

Product Saver model PS341 product reclamation system, all stainless steel construction, 4" x 10" ...

Stainless steel live bottom flooded wash tank, 48" wide Intralox flighted belt, 7' long horizonta...

Commercial raisin capper / stemmer, hopper infeed, 10" diameter infeed end, 14" diameter discharg...

FMC model 100 pulper, hopper infeed, 1/4" Ahlstrom screen, with product distributor, set up with ...

FMC model 100 pulper, stainless steel contact, hopper infeed, set up with (4) brushes and a 1/4" ...

Grundfos model CR3-17-U-FGJ-A-E-HQQE high pressure water pump, 1.5" ports, no motor installed, ne...

Stainless steel live bottom flooded wash tank, 72" wide x 11' long Intralox flighted belt, 8' hig...

Cornell model 4NMP-F5K 4" mild steel non-clog pump with a single volute impeller, driven by a 10h...

Murzan model DUS-10NH pneumatic drum pump with a DUS101M 4" diaphragm pump, 19.75" diameter stain...

FMC model 100 pulper, hopper infeed, 1/4" Ahlstrom screen, set up with brushes, 20hp 230/460/3/60...

3" x 2.5" mild steel centrifugal pump, threaded ports, 5hp 3450 rpm, 230/460/3/60, fair condition...

Gorman-Rupp T Series self-priming centrifugal mild steel pump, model number T4A60S-B74, serial nu...

ITT ACC model 100 split case water feed pump, mild steel construction, 3" x 2", 11" impeller, typ...

Vector model 2004-VE-AA peristaltic pump, serial number W3924, 1/2" Tri-Clover infeed, 1/3 HP ele...

ITT ACC model 2000 mild steel centrifugal pump, 8" x 6", driven by a 40hp 1170 rpm motor, 230/460...

APV stainless steel positive displacement pump, serial number H-1995, size number R1R, 1-1/2" Tri...

ARO Ingersoll-Rand diaphragm pump, plastic construction, 1/2" ports, good condition - as is. Condition info:...

Crepaco positive displacement pump, serial number 15093, size number 6RIHD, 3" wide x 9-1/4" long...

Paco (Coker) 3" x 3" mild steel centrifugal pump, 1.5hp 1725 direct coupled drive, 230/460/3/60, ...

Paco model C13011E2KADC7330 4" x 3" mild steel centrifugal pump, 10hp 1770rpm 230/460/3/60 direct...

Ampco model ZP2-130 positive displacement pump, 3" four bolt flange fittings, stainless steel con...

Sine sinusoidal style positive displacement pump, 4" Tri-Clamp ports, 1hp SEW mechanical variable...

Omni Mechanical Diaphragm 3/4" metering pump, model number DCYB5FP-M1XE, date/serial number 06/12...

Sasib Manzini aseptic positive displacement pump, model B-115:5220, serial number 38098, 1-1/2" t...

Waukesha model 045 positive displacement pump, 2.5" Tri-Clover fittings, dual lobe, all stainless...

PCM progressive cavity pump, 2" threaded in, 1" I-Line out, 5hp variable speed drive, 240/480/3/6...

Waukesha model 130 positive displacement pump, 3" I-Line fittings, stainless steel contact parts,...

Waukesha model 130 stainless steel positive displacement pump, 3" I-Line fittings, fair to good c...

Waukesha model 130 positive displacement pump, 3" Tri-Clamp fittings, 5hp stainless steel direct ...

Waukesha model 30 positive displacement pump, 1.5" Tri-Clover ports, stainless steel contact, no ...

Waukesha model 30 positive displacement pump, 1.5" I-Line ports, stainless steel contact, good co...

Grundfos model CR5-12-A-FGF-A-P10817311 high pressure water pump, 15gpm, 1.5" ports, 5hp motor, d...

Waukesha model 220-U2 4" positive displacement pump, horizontal mount with a 7.5hp direct coupled...

Cornell model 3NLP-F5K 3" stainless steel non-clog pump with a single volute impeller, driven by ...

Waukesha model 320 positive displacement pump, stainless steel contact, 6" fitting, 8 bolt flange...

Coker model 2000 3" x 2" mild steel centrifugal pump, driven by a 10hp 3525 rpm direct motor driv...

Waukesha model 320-U2 positive displacement pump, portable cart mounted, 6" flanged ports with Di...

Waukesha model 323 positive displacement pump, 6" aseptic flanged ports, no drive, stainless stee...

ITT ACC model 2000 mild steel centrifugal pump, 8" x 6", driven by a 40hp 1185 rpm motor, 230/460...

ITT ACC model 2000 mild steel centrifugal pump, 2" x 2", 11" impeller, type 8100, driven by a 20h...

Waukesha model 320 positive displacement pump, 6" Tri-Clamp ports, mounted vertically on a mild s...

Coker stainless steel centrifugal pump, model C218, serial number 84-32991, 2" threaded infeed, 1...

Waukesha model BB-25 positive displacement pump, 1.5" threaded ports, bronze contact parts, fair ...

Fristam FPX35 3" x 2" stainless steel centrifugal pump, Tri-Clover fittings, 2hp 1755 rpm drive m...

G&H 2.5" x 2" stainless steel centrifugal pump, model GHO-1, serial number 92-5-21206, 1.5hp 1740...

Blackmer model C1-1-VT shear pump, serial number 528827, built in 2002, 1-1/2" Tri-Clover infeed ...

APV-Crepaco model 18VS 3" x 2" stainless steel centrifugal pump, 7.5hp 1740rpm C-face couple driv...

Ampco model ZP2-045 all stainless steel positive displacement pump, portable cart mounted, 2" Tri...

Rossi-Catelli stainless steel centrifugal pump, 100mm (4" +/-) x 140mm (5.5" +/-), threaded ports...

Stainless steel centrifugal pump, 3" Tri-Clover infeed, 2" Tri-Clover discharge, 10 HP electric m...

Stainless steel centrifugal pump, 3" Tri-Clover infeed, 1-1/2" Tri-Clover discharge, electric mot...

Goulds 4" x 3" stainless steel centrifugal pump, 7.75" diameter impeller, 316 stainless steel con...

Sine model SPS-50 sinusoidal style positive displacement pump, 4" Tri-Clamp ports, 7.5hp SEW mech...

Tri-Clover (Coker) model SP218ME 3" x1.5" stainless steel centrifugal pump, 2hp 1760 rpm 230/460/...

Tri-Clover (Coker) model SP218ME 3" x2" stainless steel centrifugal pump, 2hp 1760 rpm 230/460/3/...

Waukesha model 133 positive displacement pump, stainless steel contact, 3" aseptic fittings, no d...

Tri-Clover (Coker) model SP218ME 4" x1.5" stainless steel centrifugal pump, 2hp 1750 rpm 230/460/...

Tri-Clover model C328 centrifugal pump, 2" Tri-Cover infeed, 1-1/2" Tri-Clover discharge, 10 HP e...

Waukesha model 320 positive displacement pump, 6" flanged ports, no drive, stainless steel contac...

Goulds stainless steel centrifugal pump, model number JO 1.5X2-8, serial number 438AD85, 2" flang...

Tri-Clover model C328 style 3" x 2" stainless steel centrifugal pump, Tri-Clamp fittings, 5hp sta...

Waukesha Cherry-Burrell 3" x 2.5" stainless steel centrifugal pump, 10" impeller, 20hp 3525rpm c-...

Q-Pumps stainless steel centrifugal pump, model number 00216MD18TC, serial number 210501039, 2" T...

Gorman-Rupp T-series mild steel trash pump, 4" ports, 10hp 1760rpm 230/460/3/60 direct drive moto...

Waukesha model 320-U2 R1-0 positive displacement pump, portable cart mounted, 6" flanged ports wi...

Rossi-Catelli stainless steel centrifugal pump, 100mm (4" +/-) x 140mm (5.5" +/-), threaded ports...

Tri-Clover (Coker) model SP218ME 4" x1.5" stainless steel centrifugal pump, 2hp 1760 rpm 230/460/...

Waukesha model 380 positive displacement pump, 6" bolt flange ports, mounted vertically on a mild...

Tri-Clover 2" x 1.5" stainless steel centrifugal pump, 208-220/440/3/601755rpm drive, stainless s...

Tri-Clover model 2EBHM-141D-00B-S stainless steel centrifugal pump, 3" x 2" bowtie style impeller...

Waulesha model 130 stainless steel positive displacement pump, 3" I-Line fittings, serial number ...

American Can model #1 Western single head semi-automatic can closing machine, set up for 603 diam...

Tri-Clover style 3" x 2" stainless steel centrifugal pump, 5hp 1550rpm 230/460/3/60, with a 4" di...

Waulesha model 130 stainless steel positive displacement pump, 3" Tri-Clover fittings, serial num...

APV 3" x 2" stainless steel centrifugal pump, Tri-Clover fittings, 5hp 1745 rpm drive motor, 230/...

Waukesha Cherry-Burrell 3" x 2.5" stainless steel centrifugal pump, 10" impeller, 25hp 3525rpm c-...

Morrison model 40-1-63445-000 custom drive assembly with topper and timing worm feed, set for 300...

Vac-U-Max 5hp positive displacement vacuum pump system, set up with a Sutorbilt GACMBPA 2.5" rota...

Hayward Gordon 4" screw centrifugal pump, model XCS4-A, serial number 287652, 4" flanged infeed w...

Morrison model 40-1-63445-000 custom drive assembly with topper and timing worm feed, set for 300...

American Can model 006 (422-IE-00) single head automatic can closing machine, set up for 211 cans...

Lowara SH50-250 stainless steel centrifugal pump, serial number 38097, 2-1/2" flanged infeed, 2" ...

American Can model 006VAC single head fully automatic mechanical vacuum can closing machine, set ...

Pump Works Industries 3" x 2" 316 stainless steel centrifugal pump, 7" impeller, 20hp 2890rpm 230...

American Can model #1 Western semi-automatic can closing machine, set up for 603x700 cans, automa...

Tri-Clover (Coker) model SP218ME 2" x1.5" stainless steel centrifugal pump, 3hp 1725 rpm 230/460/...

Tri-Clover 4" x 3" stainless steel centrifugal pump, flange fittings, 5hp 1725 rpm direct drive, ...

American Can model #1 Western single head semi-automatic can closing machine, set up for 603 diam...

Somme model 345 single head automatic can seamer for 1/4 club rectangular cans, straight line can...

Tri-Clover 2" x 1.5" stainless steel centrifugal pump, Tri-Clamp fittings, with a Leeson Washguar...

Tri-Clover model C328 style 3" x 2" stainless steel centrifugal pump, Tri-Clamp fittings, 7.5hp m...

American Can model 006 (422-IE-00) single head automatic can closing machine, set up for 211 cans...

Tri-Clover 3" x 2" stainless steel centrifugal pump, 3hp 1750rpm C-face coupled direct drive, 230...

Tri-Clover style 3" x 2" stainless steel centrifugal pump, Tri-Clover fittings, 10 hp 3525 rpm dr...

Dixie bench top can seamer, manually operated lifter, powered seaming rolls, lifter pad with mach...

Waukesha Cherry-Burrell 3" x 2.5" stainless steel centrifugal pump, 10" impeller, 40hp 3530rpm c-...

Key 38" wide x 6'-7" long stainless steel dewatering shaker, equipped with (2) two removable 30" ...

Roonie single head bench top can seamer, currently set on 211 x 300 can size, machine number 173,...

EL Nickell ammonia receiver with Alfa-Laval heat exchanger, 250psi, with a Summit pump, National ...

Key 24" wide x 7' long stainless steel shaker, with (3) removeable 14" x 24" screens, (2) solid a...

American Can model #1 Western single head semi-automatic can closing machine, set up for 211 diam...

Valley Welding 18" wide x 8' long stainless steel dewatering shaker, 5" tall sides, rigidized sur...

Angelus model 59P-MSLF three head can closing machine, set up for 603x700 cans, straight line inf...

Key 22" wide x 128" long step down dewatering shaker for leafy greens, set up with two sets of (3...

Key 36" wide x 8'6" long stainless steel dewatering/sizing shaker, set up with (3) 36" wide x 24"...

Beeler Industries 24" wide x 8'-9" long stainless steel vibratory shaker, deck is at 22" high off...

Key 24" wide x 8' long stainless steel dewatering shaker, 59" high infeed, 54" high discharge, se...

Key 20" wide x 88" long vibratory scale feeder with a 12" diameter circular discharge, 6" sides, ...

Key 34" wide x 72" long stainless steel dewatering shaker, with a 24" long dewatering screen with...

Continental model 42-DS-1 dual head automatic can seamer for 1 pound oval cans, chain fed to a 4 ...

CCM (Computer Controlled Machines) model AKS7400 knife sharpener, mounted on table, with controls...

Key 20" wide x 88" long vibratory scale feeder with a 12" diameter circular discharge, 6" sides, ...

Sweco 48" diameter single deck sifter, open top, wire mesh screen, with drive and a stainless ste...

Valley Welding 64" wide x 96" long stainless steel shaker, unit has (2) two removable 25" wide sc...

ZTI 15" wide x 39" long stainless steel dewatering shaker, 3/8" rods with 3/8" spacings, with sin...

Key Iso-Flo vibratory shaker for feeding a scale, 18" wide x 76" long shaker bed with 6" tall sid...

Key 34" wide x 72" long stainless steel dewatering shaker, with a 72" long dewatering screen with...

Key 12" wide x 7' long vibratory feed shaker,all stainless steel contact and frame construction, ...

Beeler Industries 24" wide x 6' long stainless steel vibratory shaker, deck is at 26" high off th...

12" wide x 28' long stainless steel distribution shaker, 5" deep walls, solid pan, 2 HP electric ...

50hp mild steel silage/waste chopper, hopper infeed, 18" diameter x 30" wide rotary head with swi...

Elliott 10" wide x 60" long dual laned vibratory shaker, with (2) 5" wide x 3" deep lanes with ri...

Kason model K24-1-SS 24" diameter single deck sifter, stainless steel contact, mild steel base, o...

HMI 66" wide x 15' long three tier single deck dewatering shaker, all stainless steel contact and...

Fitzmill D6 hammermill, bronze housing, stainless steel curved and blunt fixed knives, assembly m...

Key 34" wide x 6' long stainless steel feed shaker, solid pan, 3" tall sides, with a spray header...

Commercial 8" wide x 60" long stainless steel vibratory shaker, 6" tall sides, solid pan, 38" hig...

Fitzmill model DAO6 screw fed hammermill, 12" x 12" feed hopper, with a 3" diameter feed screw dr...

Robot Coupe R23 vertical bowl chopper, 24 quart capacity, stainless steel contact, with direct dr...

Elliott 10" wide x 60" long dual laned vibratory shaker, with (2) 5" wide x 3" deep lanes with ri...

Condition info: Good Condition

Key 24" wide x 10'8" long distribution shaker, 6" tall sides, rigidized surfaces, air actuated ce...

Fitzmill model DAO-6 fixed blade hammermill, angled feed hopper, fixed mild steel knives, stainle...

Stephan stainless steel vertical mill, appears to be a model UM74 but need to confirm, bowl measu...

Key Technologies 24" wide x 72" long stainless steel metering shaker, rigidized bottom surfaces, ...

Key 30" wide 126" long stainless steel vibratory shaker for distribution or sorting, rigidized su...

Stainless steel product slitter, set up for slitting product into 3/16" slices, 8.5" wide x 13.5"...

Kason model 24-1-SS 24" diameter single deck vibratory sifter, with top cover, 1/4" wire screen, ...

Urschel model CC slicer, stainless steel and bronze contact parts, 2hp belt drive, 230/460/3/60, ...

Olney model 4 onion topper / tailer, hand fed, with operator stations with tables for loading bro...

Sinmag model SM-302 professional bakery bread slicer, bench top, 15" wide with 31 blades set at 1...

Urschel model 1500 Comitrol processor, no head, impeller or infeed, with oiler and control panel,...

Urschel model 3600 Comitrol processor, screw fed with hopper infeed, 1/2hp screw drive, set up wi...

200 gallon stainless steel vertical tank, 38" diameter x 40" high, with hinged covers, flat botto...

Fitzmill model DAO6 screw fed hammermill, 12" x 12" feed hopper, with a 4" diameter feed screw dr...

Fitzmill model DASO-6 hammermill, stainless steel contact, pipe infeed, fixed and blunt hammers, ...

Wiley rotary mill, mild steel contact and construction, hopper infeed, 4-blade milling head, with...

Brothers / LeGrow model 10-154-82GC vegetable slicer/shredder, top feed hopper with three 7" diam...

Custom product slicer, slicing mechanism constructed of 4 each 14" diameter blades, 23-1/2" wide ...

Legrow potato slicer, stainless steel and aluminum construction, dual hopper infeed, with (3) alu...

Urschel model 3600 Comitrol processor, serial number 797, screw fed with a standard feed hopper a...

Urschel model MG Comitrol, set up with a 200 blade MicroCut head, 3" inlet, with oil mist system ...

GEA-Minoiki 22" diameter stainless steel hammermill, 15" x 19" hinged hopper infeed, 9" diameter ...

Urschel model MG Comitrol processor for liquids, equipped with a 212 blade MicroCut head, no infe...

Fitzmill model DASO6 hopper fed hammermill, 6" x 5" feed hopper, fixed blunt hammers, 7.5hp belt ...

400 gallon stainless steel vertical tank, 48" diameter x 50" tall, hinged cover, flat bottom, 2" ...

Fitzmill model DASO6 screw fed hammermill, 12"x12" feed hopper, 3" diameter feed screw with drive...

7.5 barrel stainless steel fermenter, 40" diameter x 40" tall straight wall, dome top, 36" steep ...

700 gallon stainless steel vertical tank 60" diameter x 57" high, open top, with an internal part...

Fitzmill model DASO-6 hammermill, fixed blade style hammers, hopper infeed with feed pan and top ...

La Padella 50 gallon stainless steel tank, 18" diameter x 48" tall, dome top, dish bottom, 4" Tri...

Custom built 2 lane stainless steel segment cutter last used for producing 1/2" ring cuts of squi...

Little Gem 80 gallon plastic tank, closed top with an 8" threaded cover and (2) 2" threaded plugs...

Sunshine Systems stainless steel segment / increment cutter, currently set up for 2" cuts using 9...

Urschel model CC slicer, stainless steel and bronze contact parts, 2hp belt drive, 230/460/3/60, ...

Brothers / LeGrow model 11-216-9000 vegetable slicer/shredder, top feed hopper with (3) three 7" ...

Grovedale rotary segment cutter for fruits and vegetables, all stainless steel contact and frame ...

Urschel model 1500 Comitrol processor, no head, impeller or infeed, with oiler and control panel ...

Urschel model 3640 Comitrol processor, screw fed with 1hp 230/460/3/60 drive and hopper, 3" cutti...

Urschel model 3640 Comitrol processor, set up with a 3" shredding head, no impeller, 40hp 3550 rp...

700 gallon stainless steel vertical tank 60" diameter x 60" high, hinged top covers, dish bottom ...

Brewtech 5 barrel stainless steel fermenter, 36" diameter x 72" tall, dome top, steep cone bottom...

Olsa 132 gallon (500 liter) stainless steel reactor, 30" diameter x 44tall, full vacuum internall...

30 gallon stainless steel tank, 21-1/2" diameter x 24" deep, 1-1/2" Tri-Clover sloped side bottom...

50 gallon stainless steel jacketed tank, electrically heated with a water jacket and an internal ...

50 gallon stainless steel tank with full perforations on bottom, 28" diameter x 20" deep, 3'16" r...

80 gallon stainless steel tank, 37" diameter x 17" deep, 3" Tri-Clover side bottom sloped dischar...

Stainless steel overflow briner, fully adjustable but currently set on 401 can size, Volta cable ...

Zilli-Bellini model TC32 thirty two station rotary volumetric pocket filler, set up for 603x700 c...

Zacmi 48 station rotary volumetric pocket filler, set for 211x304/400 cans, 24 pocket infeed and ...

CFM Brand volumetric fillers are of the highest quality. All components are locally available. Ac...

FMC model G836 36 pocket XL granular filler, serial number N0102, currently set on a 307 x 306 ca...

Zacmi 48 station rotary volumetric pocket filler with a 24 station rotary ingredient filler bowl ...

FMC model 21G rotary volumetric filler, set up for 307x409 cans, 4' table top conveyor frame to w...

FMC model 12G granular filler, 3" wide table top infeed to timing worm to counterclockwise rotati...

FMC 18 station volumetric pocket filler, serial number 4854-125-65, counter clockwise rotation, 5...

Zacmi stainless steel vacuum trap tank designed to work with rotary vacuum syrupers, 16" diameter...

FMC 18 station volumetric pocket filler, serial number 4854-123-65, counter clockwise rotation, 5...

FMC 112 vacuum syruper, parts machine. Condition info: Poor Condition

Continental Can Co. model 70 PVS eighteen station pre-vacuumizing syruper, machine number 2, curr...

Zacmi model V-032-31 32 station rotary vacuum filler for 401x411 cans, counter-clockwise bowl rot...

Zacmi model 225-V-040 forty station rotary vacuum filler for 307x409 cans, all stainless steel co...

FMC model 112 twelve station pre-vacuumizing filler, serial number 7916-1-65, set on 603 x 700 ca...

Datong model GCP-12 rotary vacuum filler, 12 stations, all stainless steel construction, rated to...

Solbern model PTF-DP tumble filler, serial number 10484, stainless steel topping table, solid pro...

Solbern model PTF-DP tumble filler, stainless steel topping table, flat bar product pan with 3/8"...

Zacmi model 02-79/72/S 72 station rotary vacuum filler for 300x407 cans, counter-clockwise bowl r...

FMC 12 station rotary pressure/vacuum filler for 300 x 407 cans, conveyor to timing worm to star ...

Solbern model PTF-DP tumble filler, serial number 10294, currently set on 401 x 411 can size, 9" ...

Solbern model PTF-DP filler, serial number 10041, fully adjustable but currently set on 401 can d...

Solbern model PTF tumble filler, serial number 1053 66, fully adjustable but currently set on 401...

Solbern model PTF tumble filler, serial number 10040, fully adjustable but currently set on 307 c...

Solbern model PTF tumble filler, serial number 10013, fully adjustable but currently set on 401 c...

Solbern model PTF tumble filler, serial number 1370-69, set up on 300 x 407 can size, slotted vib...

Solbern model PTF filler, set up for 603 x 700 cans, 3/16" perforated drum cover, 40" long drum, ...

Solbern model PTF tumble filler, serial number 1325 68, fully adjustable but currently set on 300...

Solbern model PTF tumble filler, serial number 1485 69, fully adjustable but currently set on 300...

Solbern model PTF tumble filler, serial number 1257 68, fully adjustable but currently set on 211...

Solbern model FTF filler, serial number 8012, fully adjustable but currently set on 300 can diame...

Solbern model FTF filler, serial number 1986-65, fully adjustable but currently set on 300 x 411 ...

PRC eight head rotary filler, set up for 300x407 cans, table top conveyor to timing worm to star ...

Ishida model CCW-RZ-212P-D/08-WP 14 head combination scale, smooth stainless steel surfaces, dual...

Stainless steel slot filler, fully adjustable but currently set on 300 can diameter, 5-1/2" maxim...

Ilapak model WA14/25 Weightronic combination scale, 14 station with dual bucket setup, 5" x 5" up...

Ilapak model WA14/25 Weightronic combination scale, 14 station with dual bucket setup, 5" x 5" up...

Ilapak model WA14/25 Weightronic combination scale, 14 station with dual bucket setup, 5" x 5" up...

High Tek model HTMW-T2-2.5D-WD combination scale, parts machine, only has (3) load cells, several...

High Tek model HTMW-T2-2.5D-WD combination scale, 14 station with dual bucket setup, 4.5" x 5.75"...

Heinzen scale bucket wash stations (5), set up for (16) buckets each, all stainless steel, on cas...

ActionPac model MINI109CLX2 dual lane linear scale filler, hopper infeed, smooth contact surfaces...

ActionPac 4-Lane linear scale filler, rigidized stainless steel surfaces, common hopper infeed, 8...

Inline pressure filler with (11) eleven fill stations, 4.5" x 10' long table top conveyor with pn...

Inline Packaging Technologies model CF-6-ECONO micro bottling line for carbonated beer and bevera...

Zilli-Bellini model DD20 twenty station rotary piston filler for 603x700 cans, conveyor to worm t...

Votator model P6G six station rotary piston filler for 603 x 700 cans, serial number 65 009, pate...

Votator model P12-L twelve-station rotary piston filler, set up for 401x411 cans, worm to star in...

Votator model P-6-G six station rotary piston filler, 603 x 700 can size, star infeed, clockwise ...

Votator model P-6-G six station rotary piston filler, set up for 603 x 700 cans, star infeed and ...